StorageWorks MSA driver - DriverDouble

Msa1000 Drivers

No named connections exist. Once we resolve your first issue reply back and I will help you in array configuration Regards Ganesh.

All your connections are set to default Windows they should be set to Linux. All forum topics Previous Topic Next Topic. Windows Server TechCenter.

You need to msa of nsa system is just msa big box of disks. Career Opportunities Open Positions. Damage to the optical cables may result.

Do not overtighten the cable ties. What were you doing when this occurred. No temperature sensor support. Any help will be much apreciated! See the illustrations later in this document for examples.

Very helpful Somewhat helpful Not helpful. Redundant configurations are used to ensure uninterrupted availability of data. Is it possible for you to order the compatible one? Hope the information can be helpful. The driver must be in the failover mode.

Msa1000 drivers

Any help would be very appreciated. Detailed instructions are not included in this section, but are documented in other chapters of this guide or in additional documents. The opinions expressed above are the personal opinions of the authors, vr steve driver inc not of Hewlett Packard Enterprise. The speed is the currently negotiated speed to the disk. Hope the issue will be resolved soon.

Drivers & software

Complete duplication of all hardware components is a requirement of a redundant configuration. Redundancy and cluster support is possible in all configurations. Customers located in the state of Hawaii will need to contact the Hawaii Department of Agriculture to determine if an Import Permit is required. Ganesh and I'm looking forward to hear form you soon. Hewlett Packard Enterprise International.

Make certain the fiber optic cables are installed and supported so that no excess weight is placed on the fibre channel connectors. If Compaq Analyze is not already loaded on your server, install it as instructed in the literature provided with Compaq Analyze. These cables are for use with short-wave transceivers only.

HPE Support Center

Hp StorageWorks MSA 1000 Manuals

We are looking forward to your response. If any component in the path between the host and the storage fails, SecurePath ensures availability by redirecting pending and subsequent requests to an alternate path. No connection attributes are modified.

In addition, these cables support half the maximum allowable distance of the multi-mode cables. Currently the existing San is configured with windows and uses secure path software for multipathing. Hello, I want to see if the information provided was helpful. Fiber optic cables used will differ, depending on the components and devices being connected.

These redundant physical connections define separate physical paths. Office Office Exchange Server. Make sure your switch aren't zoned. Route the excess cables out of the way, along the side of the rack. Changes may include installing redundant controllers, additional controller cache, embedded switches, or embedded hubs.

Refer to the documentation that came with the rack for specific instructions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. No external storage boxes are attached. You can contact us if you need any help on this. You can not post a blank message.


Contact Email us Tell us what you think. All references are included. Biosafety classification is based on U. For information on using SecurePath, refer to the documentation provided with your SecurePath software.


Just change the wwpn to the next hba. Windows Server is of the new generation of Operating Systems in the Windows family. To obtain the latest version of the operating system, use your normal support channels. As mentioned previously, the fiber cables must be connected in a precise manner to provide the multiple paths required when rerouting data.

The following illustrations provide samples of possible configurations, and are in no way comprehensive. Plans should include decisions about total system capacity, fault-tolerance and striping methods of the arrays, sizes of the arrays, and plans for future growth. Support for Linux and Msa was added much later. Unfortunately, due to the complexity of this issue, it is not effectively assist with this request in the TechNet forum. For information on setting up external switches and routers as well as the servers, refer to their respective user manuals.